Our lumber products are not listed currently in our on-line catalog. We have an extensive line of lumber products in inventory, please call the store for details.
Valspar® Expressions™ Select Exterior Paint & Primer

Valspar® Expressions™ Select Exterior Paint & Primer

Valspar

Available Inventory: 8
  • $22.99
    Unit price per 



This excellent general-purpose exterior latex paint and primer provides great hide and coverage, with fade-resistant color that will keep your exterior space looking beautiful. This 100% acrylic formula provides for easy cleanup.

  • Great hide & coverage
  • Fade-resistant color
  • Resists cracking & peeling
  • 100% acrylic, easy cleanup
  • Provides a mold- and mildew-resistant finish

HOW TO USE

  • Usage
    Properly prepared exterior surfaces of wood, hardboard, aluminum siding, vinyl siding, masonry, brick, stucco, cement composition panels and metal. Not for use on floors.
  • Prep
    Remove surface contaminants with an appropriate cleaner, rinse thoroughly and allow to dry. Remove peeled or damaged paint. Sand glossy surfaces dull. Seal stains with the appropriate primer. Caulk around windows, doors and other openings after spot priming bare surfaces. Knots and some woods, such as redwood and cedar, contain a high amount of tannin, a colored wood extract. If applied to these unpainted woods, the first coat of paint may show some staining, but it will be trapped in the first coat. A second coat will uniform the appearance. If staining persists, spot prime severe areas with a stain-blocking primer.
  • Application
    Stir paint thoroughly. Intermix containers to ensure uniform color. Apply only when paint, surface and air temperatures are 35-90°F (2-32°C) during application and drying time. Do not paint if temperatures are expected to be below 35°F (2°C) within 48 hours of application or when heavy dew or precipitation is expected in the next 2.5 hours. Brush: Use a premium-quality synthetic brush. Roller: 3/8-1/2 inch nap, premium-quality synthetic cover. Airless Spray: 2000 PSI, 0.015-0.021" tip. These recommendations are a starting point only. Due to variability in sprayers, we recommend testing your spray pattern and flow before proceeding. If spraying large surfaces, be sure to back-brush or roll immediately after spraying.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 1 hour - 4 hour
    Recoat: 2 hour - 4 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities for proper method of disposal and recycling.
Application Temperature: 40 - 90 °F
Recommended Coats: 1, 2 coats
Dry To the Touch*: 1 hour - 4 hour
Recoat*: 2 hour - 4 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

We Also Recommend